E-Lins H685m Series Manual do Utilizador descarregar pdf (Página 131)

H820 User Manual 

E‐LinsTechnologyCo.,Limited

Tel:+86‐755‐29230581E‐mail:sales@e‐lins.comsales@szelins.comwww.szelins.comwww.e‐lins.com

Notes:

1) If the PPTP cannot through between client and server, please check if the MPPE configuration

is matched with PPTP server or not.

2) Normally PPTP server has route for 192.168.1.1/24 or 192.168.0.1/24. Please check the PPTP

server has the route of 192.168.8.0/24 if your H820 router is with IP 192.168.8.1.

For example, if H820 LAN IP is 192.168.8.1 and assigned PPTP IP is 172.1.1.2. Then at the PPTP

server, need add a route for 192.168.8.0/24 and gateway as 172.168.1.2. Meanwhile, we suggest

PPTP Server use fixed PPTP IP rule for PPTP client, otherwise need modify the route’s gateway

every time because the PPTP client gets a random PPTP IP.

5.11 IPSec sample

Preparation before test:

1) Take two H685/H820 router, one for IPSec Server, the other is for IPSec client. For formal application, recommend

use CISCO VPN Router for Server, and E-Lins Router for Client.

2) We configure Server Router gateway LAN IP as 192.168.8.1, and Client Router gateway LAN IP as 192.168.9.1.

Please refer to the manual chapter

3) Make Server Router and Client Router both online. Here we use Cell connection for both routers.

4) Sample topology is as follows,

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 137

Sem comentários

E-Lins H685m Series Manual do Utilizador Página 131